Filter parameters: Time Range : 00:00-23:59 Date Range : 21-Dec-14 - 21-Dec-14 Domain : Application Severity : E Only relevant: yes Show system messages: no Source : * LanguageID : 0x409 --------------------- S. Date/Time ID Source Seq. Message Text --------------------- E 21-Dec-14 14:56:22 13 MRI_MLC 31 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. E 21-Dec-14 14:56:22 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:56:17 15 MRI_PER 0 Scanner is not ready for measurement. Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:56:17 36 MRI_PER 0 Booting the Scanner has failed. See previous messages for details. --------------------- E 21-Dec-14 14:56:17 13 MRI_MLC 0 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:56:17 63 MRI_CAN 0 Gradient Power Amplifier error: Command to GPA is not acknowledged in time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:56:17 13 MRI_MLC 0 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:56:17 63 MRI_CAN 0 Gradient Power Amplifier error: Command to GPA is not acknowledged in time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:56:15 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:56:14 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:56:14 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:56:14 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:56:13 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:56:11 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:56:09 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:56:08 23 MRI_SUP 0 Magnet Supervision error: No communication with unit MSU. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:56:08 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:56:07 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:56:05 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:56:03 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:56:01 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:59 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:57 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:55 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:53 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:51 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:49 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:49 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:55:47 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:45 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:43 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:41 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:39 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:37 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:37 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:55:36 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:55:35 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:33 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:31 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:29 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:27 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:25 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:23 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:21 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:19 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:18 63 MRI_CAN 0 Gradient Power Amplifier error: Command to GPA is not acknowledged in time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:55:17 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:15 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:13 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:11 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:09 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:07 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:06 80 MRI_SUP 0 Gradient Power Amplifier error: No communication with unit GPA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:55:06 63 MRI_CAN 0 Gradient Power Amplifier error: Command to GPA is not acknowledged in time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:55:06 18 MRI_CLI 1 Scanner communication error: Communication to Scanner has been interrupted. Retry, reboot Scanner, switch off/on Scanner. E 21-Dec-14 14:55:06 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 14:55:05 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:03 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:55:01 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:54:59 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:54:57 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:54:55 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:54:53 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:54:51 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:54:41 34 MRI_PER 0 Scanner is booting. --------------------- E 21-Dec-14 14:49:56 35 MRI_PER 0 Scanner is not online (might be switched off). --------------------- E 21-Dec-14 14:49:56 15 MRI_PER 0 Scanner is not ready for measurement. Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:49:56 18 MRI_CLI 0 Scanner communication error: Communication to Scanner has been interrupted. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:49:54 18 MRI_CLI 0 Scanner communication error: Communication to Scanner has been interrupted. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:49:54 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 14:49:11 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:49:11 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:49:11 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:49:11 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:49:11 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:49:11 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:49:11 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:49:11 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:48:46 13 MRI_MLC 31 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. E 21-Dec-14 14:48:46 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:41 15 MRI_PER 0 Scanner is not ready for measurement. Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:48:41 36 MRI_PER 0 Booting the Scanner has failed. See previous messages for details. --------------------- E 21-Dec-14 14:48:41 13 MRI_MLC 0 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:48:41 63 MRI_CAN 0 Gradient Power Amplifier error: Command to GPA is not acknowledged in time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:48:41 13 MRI_MLC 0 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:48:41 63 MRI_CAN 0 Gradient Power Amplifier error: Command to GPA is not acknowledged in time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:48:39 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:38 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:48:38 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:48:38 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:48:37 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:35 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:33 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:32 23 MRI_SUP 0 Magnet Supervision error: No communication with unit MSU. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:48:32 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:48:31 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:29 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:27 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:25 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:23 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:21 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:19 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:17 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:15 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:13 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:13 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:48:11 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:09 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:07 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:05 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:03 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:01 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:48:01 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:48:01 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:47:59 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:57 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:55 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:53 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:51 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:49 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:47 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:45 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:43 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:43 63 MRI_CAN 0 Gradient Power Amplifier error: Command to GPA is not acknowledged in time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:47:41 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:39 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:37 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:35 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:33 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:31 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:31 80 MRI_SUP 0 Gradient Power Amplifier error: No communication with unit GPA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:47:31 63 MRI_CAN 0 Gradient Power Amplifier error: Command to GPA is not acknowledged in time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 14:47:31 18 MRI_CLI 1 Scanner communication error: Communication to Scanner has been interrupted. Retry, reboot Scanner, switch off/on Scanner. E 21-Dec-14 14:47:31 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 14:47:29 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:27 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:25 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:23 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:21 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:19 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:17 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:15 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:13 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:11 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 14:47:01 34 MRI_PER 0 Scanner is booting. --------------------- E 21-Dec-14 12:21:10 35 MRI_PER 0 Scanner is not online (might be switched off). --------------------- E 21-Dec-14 12:21:10 15 MRI_PER 0 Scanner is not ready for measurement. Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 12:21:05 18 MRI_CLI 0 Scanner communication error: Communication to Scanner has been interrupted. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 12:21:05 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 12:16:12 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 12:16:06 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 12:16:00 63 MRI_CAN 0 Gradient Power Amplifier error: Command to GPA is not acknowledged in time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 12:03:55 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 12:03:49 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 12:03:43 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 12:03:37 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 12:03:30 63 MRI_CAN 0 Gradient Power Amplifier error: Command to GPA is not acknowledged in time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 12:03:18 63 MRI_CAN 0 Gradient Power Amplifier error: Command to GPA is not acknowledged in time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 12:03:12 63 MRI_CAN 0 Gradient Power Amplifier error: Command to GPA is not acknowledged in time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:30:29 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:30:29 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:30:29 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:30:29 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:30:29 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:30:29 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:30:29 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:30:28 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:17:58 13 MRI_MLC 31 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. E 21-Dec-14 11:17:58 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:53 15 MRI_PER 0 Scanner is not ready for measurement. Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:17:53 36 MRI_PER 0 Booting the Scanner has failed. See previous messages for details. --------------------- E 21-Dec-14 11:17:53 13 MRI_MLC 0 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:17:53 63 MRI_CAN 0 Gradient Power Amplifier error: Command to GPA is not acknowledged in time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:17:53 13 MRI_MLC 0 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:17:52 63 MRI_CAN 0 Gradient Power Amplifier error: Command to GPA is not acknowledged in time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:17:51 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:49 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:17:49 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:17:49 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:17:49 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:47 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:45 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:43 23 MRI_SUP 0 Magnet Supervision error: No communication with unit MSU. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:17:43 11 MRI_CAN 0 Magnet Supervision error: Command to MSU not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:17:43 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:40 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:38 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:36 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:34 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:32 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:30 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:28 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:26 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:24 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:24 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:17:22 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:20 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:18 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:16 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:14 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:12 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:12 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:17:12 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:17:10 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:08 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:06 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:04 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:02 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:17:00 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:58 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:56 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:54 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:54 63 MRI_CAN 0 Gradient Power Amplifier error: Command to GPA is not acknowledged in time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:16:52 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:50 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:48 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:46 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:44 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:42 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:42 80 MRI_SUP 0 Gradient Power Amplifier error: No communication with unit GPA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:16:42 63 MRI_CAN 0 Gradient Power Amplifier error: Command to GPA is not acknowledged in time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:16:42 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 11:16:40 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:38 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:36 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:34 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:32 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:30 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:28 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:26 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:24 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:22 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 11:16:12 34 MRI_PER 0 Scanner is booting. --------------------- E 21-Dec-14 11:14:16 35 MRI_PER 0 Scanner is not online (might be switched off). --------------------- E 21-Dec-14 11:14:16 15 MRI_PER 0 Scanner is not ready for measurement. Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 11:14:15 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 11:00:14 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:53:26 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:53:26 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:53:23 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:53:20 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:53:15 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:53:15 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:53:12 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:53:09 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:52:11 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:52:11 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:52:08 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:52:05 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:52:05 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:52:05 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:51:47 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:51:47 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:51:44 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:51:23 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:51:22 12 MRI_MSU 0 Magnet Supervision error: MSU loadware reported error (CAN system error 12). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:51:14 12 MRI_MSU 0 Magnet Supervision error: MSU loadware reported error (CAN system error 12). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:30:03 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:29:42 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:29:42 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:29:39 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:29:36 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:29:36 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:29:14 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:28:53 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:28:32 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:28:32 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:28:14 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:28:14 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:28:11 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:28:02 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:27:50 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:27:50 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:27:44 12 MRI_MSU 0 Magnet Supervision error: MSU loadware reported error (CAN system error 12). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:27:36 12 MRI_MSU 0 Magnet Supervision error: MSU loadware reported error (CAN system error 12). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:27:30 12 MRI_MSU 0 Magnet Supervision error: MSU loadware reported error (CAN system error 12). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:05:54 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:05:30 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:05:02 12 MRI_MSU 0 Magnet Supervision error: MSU loadware reported error (CAN system error 12). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:04:56 12 MRI_MSU 0 Magnet Supervision error: MSU loadware reported error (CAN system error 12). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:04:51 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:04:32 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:04:32 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:04:29 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:04:26 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:04:23 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:04:20 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:04:20 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:04:18 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:04:18 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:04:17 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:04:14 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:04:14 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:04:05 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:03:56 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:03:29 12 MRI_MSU 0 Magnet Supervision error: MSU loadware reported error (CAN system error 12). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:03:19 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:03:17 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:03:16 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:03:15 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:03:15 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:03:14 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:03:13 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:03:12 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:03:11 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:03:10 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:03:09 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:03:08 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:03:08 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:03:07 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:03:06 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:03:05 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:03:04 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:02:59 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:02:44 12 MRI_MSU 0 Magnet Supervision error: MSU loadware reported error (CAN system error 12). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:02:42 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:02:41 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:02:40 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:02:39 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:02:38 12 MRI_MSU 0 Magnet Supervision error: MSU loadware reported error (CAN system error 12). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:01:34 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:01:34 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:01:31 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:01:28 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:01:28 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:01:28 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:01:25 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:01:22 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:01:22 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:01:19 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:01:16 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:01:16 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:01:14 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:01:14 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:00:58 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:00:58 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:00:55 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:00:52 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:00:49 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:00:45 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:00:44 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:00:44 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:00:26 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:00:26 12 MRI_MSU 0 Magnet Supervision error: MSU loadware reported error (CAN system error 12). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:00:19 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:00:19 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:00:19 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:00:19 12 MRI_MSU 0 Magnet Supervision error: MSU loadware reported error (CAN system error 12). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:00:13 12 MRI_MSU 0 Magnet Supervision error: MSU loadware reported error (CAN system error 12). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:00:12 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 10:00:04 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 10:00:03 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:59:54 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:59:49 12 MRI_MSU 0 Magnet Supervision error: MSU loadware reported error (CAN system error 12). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:59:44 12 MRI_MSU 0 Magnet Supervision error: MSU loadware reported error (CAN system error 12). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:59:42 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:59:40 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 09:59:19 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 09:59:18 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:59:15 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 09:58:24 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:58:24 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:58:21 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:58:18 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:58:17 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:57:59 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:57:56 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 09:57:35 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:57:34 12 MRI_MSU 0 Magnet Supervision error: MSU loadware reported error (CAN system error 12). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:57:27 12 MRI_MSU 0 Magnet Supervision error: MSU loadware reported error (CAN system error 12). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:57:20 12 MRI_MSU 0 Magnet Supervision error: MSU loadware reported error (CAN system error 12). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:54:24 358 CSA_TF 0 at least primary character set must be present within character set list --------------------- E 21-Dec-14 09:54:21 24 CAP_AT 0 Error terminating component Cap3dFEFly. --------------------- E 21-Dec-14 09:54:21 21 CAP_AT 0 Component Cap3dFEFly initialization failed. --------------------- E 21-Dec-14 09:54:21 23 CAP_EXT 0 Entryhook of extension 'Cap3dFEFly' failed. Extension will be unloaded. --------------------- E 21-Dec-14 09:54:18 64 CAP_AT 0 Return Object is busy and might receive data from command execution at the moment. Use another Return Object instance of the same type instead. My Proxy/Return is CapFlPxyErrorHandler/CapFlRetErrorHandler. My process Id is 6040. --------------------- E 21-Dec-14 09:54:11 7 MRI_MTP 0 Patient Table Hardware error. Maybe scanner is booting or not ready yet (\n4\pkg\MrApplications\MrExamUI\TablePosition/TablePositionService.cpp(494)). --------------------- E 21-Dec-14 09:53:59 13 MRI_MLC 0 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:53:57 233 CSA_OSC 0 getSuppliers failed --------------------- E 21-Dec-14 09:53:54 15 MRI_PER 0 Scanner is not ready for measurement. Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:53:54 36 MRI_PER 0 Booting the Scanner has failed. See previous messages for details. --------------------- E 21-Dec-14 09:53:54 13 MRI_MLC 0 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:53:54 13 MRI_MLC 0 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:53:54 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????)???????? --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????)???????? --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????)???????? --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????)???????? --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????)???????? --------------------- E 21-Dec-14 09:53:52 43 CAP_AT 0 The communication layer yields no Command Object that seems to implement the requested command. My classname is CapFilmPxySyncConfig. My process Id is 5888. --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????)???????? --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????)???????? --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????)???????? --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????)???????? --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:53:52 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????) --------------------- E 21-Dec-14 09:53:46 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:53:44 34 MRI_PER 0 Scanner is booting. --------------------- E 21-Dec-14 09:53:41 35 MRI_PER 0 Scanner is not online (might be switched off). --------------------- E 21-Dec-14 09:53:29 50068 CAP_AN 0 Versant exception occured: E5006: OB_NO_SUCH_OBJECT: Cannot find the object, loid = 4.0.9054288 ("om/ob/obbuf.c", line 2216) --------------------- E 21-Dec-14 09:53:29 174 CAP_AN 0 Some DB objects could not be loaded. LOIDS: ? --------------------- E 21-Dec-14 09:52:59 358 CSA_TF 0 at least primary character set must be present within character set list --------------------- E 21-Dec-14 09:33:50 9 MRI_MSR 0 Measurement control error: Internal error (measurement server not responding). Reboot syngo MR. --------------------- E 21-Dec-14 09:33:50 43 CAP_AT 0 The communication layer yields no Command Object that seems to implement the requested command. My classname is MesSerStopPxy. My process Id is 5456. --------------------- E 21-Dec-14 09:33:26 24 CAP_AT 0 Error terminating component SprintBE. --------------------- E 21-Dec-14 09:33:15 82 CSA_OSC 0 Synch handle is not valid --------------------- E 21-Dec-14 09:33:14 24 CAP_AT 0 Error terminating component MrEvaSvr. --------------------- E 21-Dec-14 09:33:13 43 CAP_AT 0 The communication layer yields no Command Object that seems to implement the requested command. My classname is CapPageUnregisterClientProxy. My process Id is 5808. --------------------- E 21-Dec-14 09:33:13 43 CAP_AT 0 The communication layer yields no Command Object that seems to implement the requested command. My classname is CapPageDestroyLayoutProxy. My process Id is 5808. --------------------- E 21-Dec-14 09:33:13 43 CAP_AT 0 The communication layer yields no Command Object that seems to implement the requested command. My classname is CapPageDestroyLayoutProxy. My process Id is 5808. --------------------- E 21-Dec-14 09:33:13 43 CAP_AT 0 The communication layer yields no Command Object that seems to implement the requested command. My classname is CapPageDestroyLayoutProxy. My process Id is 5808. --------------------- E 21-Dec-14 09:33:13 43 CAP_AT 0 The communication layer yields no Command Object that seems to implement the requested command. My classname is CapPageDocumentQueryProxy. My process Id is 5808. --------------------- E 21-Dec-14 09:33:12 157 CAP_PAG 0 A CapPage internal error has occured. --------------------- E 21-Dec-14 09:33:09 35 MRI_PER 25 Scanner is not online (might be switched off). E 21-Dec-14 09:33:09 15 MRI_PER 24 Scanner is not ready for measurement. Reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 18 MRI_CLI 23 Scanner communication error: Communication to Scanner has been interrupted. Retry, reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 13 MRI_MCO 22 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. E 21-Dec-14 09:33:09 25 MRI_SUP 21 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 7 MRI_RCA 20 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 15 MRI_CAN 19 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 15 MRI_PER 18 Scanner is not ready for measurement. Reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 36 MRI_PER 17 Booting the Scanner has failed. See previous messages for details. E 21-Dec-14 09:33:09 13 MRI_MLC 16 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 15 MRI_CAN 15 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 25 MRI_SUP 14 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 15 MRI_CAN 13 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 34 MRI_PER 12 Scanner is booting. E 21-Dec-14 09:33:09 35 MRI_PER 11 Scanner is not online (might be switched off). E 21-Dec-14 09:33:09 15 MRI_PER 10 Scanner is not ready for measurement. Reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 13 MRI_MCO 9 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. E 21-Dec-14 09:33:09 25 MRI_SUP 8 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 7 MRI_RCA 7 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 7 MRI_RCA 6 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 25 MRI_SUP 5 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 7 MRI_RCA 4 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 25 MRI_SUP 3 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 7 MRI_RCA 2 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 7 MRI_RCA 1 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:33:09 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:33:09 190 CSA_OSC 0 Process Allready started --------------------- E 21-Dec-14 09:33:08 35 MRI_PER 0 Scanner is not online (might be switched off). --------------------- E 21-Dec-14 09:33:08 15 MRI_PER 0 Scanner is not ready for measurement. Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:33:07 18 MRI_CLI 0 Scanner communication error: Communication to Scanner has been interrupted. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:33:07 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 09:33:04 18 MRI_APE 0 The image reconstruction system is not ready. If the system is rebooting at the moment please wait for system startup. Otherwise reboot image reconstruction system. --------------------- E 21-Dec-14 09:32:09 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:32:08 13 MRI_MLC 15 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. E 21-Dec-14 09:32:08 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 09:32:06 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:32:03 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:32:03 15 MRI_PER 0 Scanner is not ready for measurement. Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:32:03 36 MRI_PER 0 Booting the Scanner has failed. See previous messages for details. --------------------- E 21-Dec-14 09:32:03 13 MRI_MLC 0 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:32:03 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:32:03 13 MRI_MLC 0 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:32:01 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 09:31:59 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 09:31:57 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 09:31:55 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 09:31:53 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 09:31:51 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 09:31:50 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:31:50 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:31:50 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 09:31:49 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 09:31:47 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 09:31:45 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 09:31:43 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 09:31:41 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 09:31:39 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 09:31:37 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 09:31:35 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 09:31:33 12 MRI_MLC 0 MPCU startup script not yet finished. --------------------- E 21-Dec-14 09:31:23 34 MRI_PER 0 Scanner is booting. --------------------- E 21-Dec-14 09:20:05 35 MRI_PER 0 Scanner is not online (might be switched off). --------------------- E 21-Dec-14 09:20:05 15 MRI_PER 0 Scanner is not ready for measurement. Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:20:03 18 MRI_CLI 0 Scanner communication error: Communication to Scanner has been interrupted. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:20:03 13 MRI_MCO 0 Scanner communication error: Data transfer to Scanner failed. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 09:16:47 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:16:47 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:16:44 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:16:41 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:16:40 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:16:40 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:16:31 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:16:22 25 MRI_SUP 0 Cooling System error: No communication with unit RCA. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:16:22 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:16:19 15 MRI_MCO 0 Scanner communication error: Communication to Scanner timed out. Retry, reboot Scanner, switch off/on Scanner, reboot sygno MR. --------------------- E 21-Dec-14 09:16:10 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:15:58 7 MRI_RCA 0 Cooling System error: RCA firmware reported an error (CAN system error 7). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:11:30 358 CSA_TF 0 at least primary character set must be present within character set list --------------------- E 21-Dec-14 09:11:26 24 CAP_AT 0 Error terminating component Cap3dFEFly. --------------------- E 21-Dec-14 09:11:26 21 CAP_AT 0 Component Cap3dFEFly initialization failed. --------------------- E 21-Dec-14 09:11:26 23 CAP_EXT 0 Entryhook of extension 'Cap3dFEFly' failed. Extension will be unloaded. --------------------- E 21-Dec-14 09:11:24 64 CAP_AT 0 Return Object is busy and might receive data from command execution at the moment. Use another Return Object instance of the same type instead. My Proxy/Return is CapFlPxyErrorHandler/CapFlRetErrorHandler. My process Id is 5808. --------------------- E 21-Dec-14 09:11:17 7 MRI_MTP 0 Patient Table Hardware error. Maybe scanner is booting or not ready yet (\n4\pkg\MrApplications\MrExamUI\TablePosition/TablePositionService.cpp(494)). --------------------- E 21-Dec-14 09:11:05 13 MRI_MLC 0 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:11:03 233 CSA_OSC 0 getSuppliers failed --------------------- E 21-Dec-14 09:11:00 15 MRI_PER 0 Scanner is not ready for measurement. Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:11:00 36 MRI_PER 0 Booting the Scanner has failed. See previous messages for details. --------------------- E 21-Dec-14 09:11:00 13 MRI_MLC 0 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:11:00 13 MRI_MLC 0 Scanner control error: Error booting Scanner (error in startup script). Reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:11:00 15 MRI_CAN 0 Cooling System error: Command to RCA not acknowledged on time. Retry, reboot Scanner, switch off/on Scanner. --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????)???????? --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????)???????? --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????)???????? --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????)???????? --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????)???????? --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????)???????? --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????)???????? --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????)???????? --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????)???????? --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: CapFlPrinterInterface::insertJobInQ() failed --------------------- E 21-Dec-14 09:10:58 274 CAP_FL 0 A functional error occured: Versant exception caught. ????????????›???????????????????????????????????) --------------------- E 21-Dec-14 09:10:57 43 CAP_AT 0 The communication layer yields no Command Object that seems to implement the requested command. My classname is CapFilmPxySyncConfig. My process Id is 4204. --------------------- E 21-Dec-14 09:10:50 34 MRI_PER 0 Scanner is booting. --------------------- E 21-Dec-14 09:10:47 35 MRI_PER 0 Scanner is not online (might be switched off). --------------------- E 21-Dec-14 09:10:34 50068 CAP_AN 0 Versant exception occured: E5006: OB_NO_SUCH_OBJECT: Cannot find the object, loid = 4.0.9053961 ("om/ob/obbuf.c", line 2216) --------------------- E 21-Dec-14 09:10:34 174 CAP_AN 0 Some DB objects could not be loaded. LOIDS: ? --------------------- E 21-Dec-14 09:10:03 358 CSA_TF 0 at least primary character set must be present within character set list