Current init block: Basic unit

Tilt drive - Offset value:	6
Tabletop, longitudinal - Offset value:	10
Spotfilm device longitudinal drive - Offset value:	10
Column longitudinal drive - Offset value:	10
Compression - Offset value:	40
Tabletop, longitudinal - right end position:	-8000
Tabletop, longitudinal - left end position:	8000
Tilt drive - 0° position from +10°:	27087
Tilt drive - 0° position from -10°:	-4103
Tilt drive - 90° end  position:	890
Tomo hight - Offset value:	130
Room dimensions - Room height:	29000
Room dimensions - Head-end wall distance:	30000
Room dimensions - Foot-end wall distance:	25000
Room dimensions - Distance from floor to I.I.:	4000
Compression - Speed value:	50
Tomo symmetry - Offset value:	0
_________________________________

Current init block: System

Device version:	3
Image intensifier:	1
XCU type:	1
Device type:	2
Diaphragm plates:	0
DSA filter:	0
Peristepping:	0
Spinary reconstruction:	0
DR available:	0
Tomo available:	1
Motor assisted compression:	1
Tomo height light localizer:	0
Second remote control console:	0
Zoom position:	0
RWG type:	0
ACSS available:	0
_________________________________

Current init block: Collimator

Overframing on film - Height offset value:	0
Overframing on film - Width offset value:	0
n.a.	0
Speed of plates	12
Switch-on time of the light localizer lamp	30
Zoom levels	3
Aperture iris, zoom level 0	2140
_________________________________

Current init block: Spotfilm device (cassette system)

Cassette drive, transverse - Offset value:	91
Cassette tensioning - Offset value:	100
Cassette type:	1
Cassette tensioning - Nominal close speed:	60
Cassette tensioning - Nominal open speed:	60
Cassette tensioning - Initial close speed:	75
Cassette tensioning - Initial open speed:	75
_________________________________

Current init block: Spotfilm device (x-ray manipulation)

Diaphragm plates - Offset value:	87
Grid - Offset value:	100
Grid - Delay time:	0